Guide

Who should sign off private-label artwork, and how?

Private-label artwork should be signed off by one named approver, after a structured check of digital proofs and at least one physical proof, with every approval recorded against a version number. A clear sign-off routine prevents most printing errors and the costly reprints that follow them.

By Hemang Jain, Founder, Anadoris

Why does sign-off cause so many delays?

Artwork passes through several hands: brand, operations, sometimes legal, and the manufacturer's prepress team. Each round of comments creates a new version. Without a clear owner, comments arrive late, contradict one another or relate to an old version, and the project stalls.

Once artwork is approved, the manufacturer buys printed components against it. A mistake found after printing usually means new components, so the cost of a careless sign-off is far higher than the time saved.

A further cause is unclear authority. When a general manager, a brand manager and an owner all comment, nobody is sure whose view wins. Settling that before the first proof saves more time than any tool or template.

Who should be involved?

This table sets out typical roles in private-label artwork sign-off. In a small business one person may hold several roles, but each check still needs doing.

RoleWhat they checkFinal say?
ApproverOverall look, brand fit, final decisionYes
Brand or design leadLogo, colours, typography, layoutAdvises
Operations leadProduct names, sizes, how staff and guests will recognise each itemAdvises
Regulatory or legal checkIngredient list, warnings, address, claimsAdvises, but can block
Manufacturer's prepress teamDieline fit, print feasibility, finishesAdvises on technical points
STAY by Anadoris hospitality concept: lakeside escape
Lakeside escape

What should you check on a digital proof?

  • Spelling of every word, including the brand name and product names.
  • The correct product on the correct component: shampoo text on the shampoo label, not the conditioner.
  • Contents and units.
  • Ingredient list matches the manufacturer's current list for that product.
  • Address and responsible business details.
  • Barcode, if used, and its number.
  • Colour references and finish layers.
  • Nothing important inside the cut or fold areas.

Read the text aloud, line by line. It is slower, but it catches errors that the eye skips.

Why approve a physical proof as well?

A digital proof shows layout; it cannot show how ink sits on a curved bottle, how a foil catches light or how small text reads on a miniature. A physical proof, or a printed sample on the actual component, shows these.

Hold the physical proof where it will be used. Check legibility in bathroom lighting, check that shampoo and conditioner can be told apart quickly, and check that the colour looks right next to your other brand materials. If the physical proof differs from the digital one, ask why before approving.

For a range, look at all physical proofs together. Products that look fine one at a time can look mismatched side by side: one label slightly warmer in colour, one product name set in a different size, one logo sitting higher than the others. Lining them up is the quickest way to catch inconsistency before it is printed in quantity.

How should feedback be given?

  1. Collect all comments internally first.
  2. Resolve disagreements before replying.
  3. Send one consolidated list per round, marked against the version number.
  4. Make each comment specific: what to change, where and to what.
  5. Ask the manufacturer to confirm the changes in writing before the next proof.

"Make the logo bigger" invites another round. "Increase logo width to fill the space between the left margin and the product name" does not.

Use a simple feedback table with columns for the file name, version, location on the artwork, current text or element, requested change and reason. The manufacturer's prepress team can then work through it line by line and confirm each change, which removes most misunderstandings.

STAY by Anadoris concept: olive green wall-mounted dispensers in a three fixed dispensers in stone shower, rainforest
Bali jungle villa

How should the final approval be recorded?

Approval should be written, dated and tied to a specific version of each file. Keep a simple register with one line per component: product, component, version, approver, date and any notes. Store the approved PDF alongside it.

This register becomes essential at reorder. When a new batch of labels is printed, the manufacturer and you can both confirm it matches the approved version, and nobody accidentally reprints an earlier draft.

Keep the register somewhere the whole team can find it, not in one person's inbox. If the approver leaves the business, the record of what was approved, and why, should stay behind.

When should you reopen approved artwork?

Only for a real reason: a change in ingredients, a change in legal requirements, a new address or a deliberate design update. Each reopened file needs a new version number, a fresh proof and a fresh approval, and old printed stock may need to be used up or written off.

Plan small text updates to coincide with a reorder so that components change once. For the wider sampling process, see how to approve amenity samples without losing months, and for how STAY runs proofs, see private label.

Questions on this topic

How many artwork proof rounds are normal?

There is no fixed number. Clear, consolidated feedback usually keeps rounds few, while scattered comments from many reviewers add rounds.

Can I approve artwork by email?

Yes, provided the approval names the file and version, is dated and comes from the agreed approver.

What happens if I find an error after printing?

Printed components with an error usually have to be reprinted, which adds cost and time. That is why a careful proof check before approval matters.

Keep reading

Ready when you are

Tell us about your space. We will send samples.

CallRequest samples