Guide
How to read an amenity product specification sheet
A product specification sheet is the supplier's formal description of what it will deliver: properties, limits, packaging and shelf life. Read it as the contract for quality, because every later test, complaint and approval is judged against it.
By Hemang Jain, Founder, Anadoris
What is a product specification sheet?
A specification sheet sets out the measurable and descriptive properties of a product and the range each must fall within. It is different from a marketing data sheet, which describes benefits, and from a certificate of analysis, which reports one batch's results.
For a hotel or brand buyer, the specification is the single most useful quality document. It turns words such as "rich lather" or "light fragrance" into agreed, checkable facts. If two parties disagree later about whether a delivery is acceptable, the specification settles it.
Writing your own amenity specification is a different task, covered in our guide to writing an amenity specification. This article is about reading the one a supplier sends you.
What are the main sections of a specification sheet?
Specifications vary in layout, but most contain the same sections. This table explains them.
| Section | What it contains | What to check |
|---|---|---|
| Identification | Product name, code, version, date | Version is current and matches your order |
| Physical properties | Appearance, colour, odour, form | Described against an approved standard |
| Chemical properties | pH, viscosity, density, active content where relevant | Each has a numeric range, not a single value |
| Microbiological limits | Acceptable limits and organisms tested | Limits stated and method referenced |
| Fill and packaging | Nominal fill, tolerance, components | Matches the pack you approved |
| Shelf life and storage | Shelf life, storage conditions | Realistic for your stores and climate |
| Ingredients | INCI list or reference to it | Matches the label and your requirements |

How should you read the numeric limits?
Each measurable property should have a range with a lower and upper limit, or a maximum. A single figure with no range cannot be failed or passed, so ask for limits. Ranges that are very wide may be a sign that the supplier wants room for variation you would notice; ranges that are very narrow may be hard to meet consistently and lead to rejected batches.
Ask how each property is measured and at what temperature, because some results, such as viscosity, change with temperature and method. Two laboratories can produce different results for the same product if they test differently.
If you are unsure whether a range is sensible, ask the supplier what results its recent batches have actually achieved. Real data from several batches shows whether the product sits comfortably in the middle of its limits or keeps brushing against one edge. A product that lives near its limit is more likely to fail a future batch.
Look for units on every figure as well. A viscosity without units, or a pH without a stated test condition, leaves room for misunderstanding between your team and the supplier's laboratory.
What do the descriptive properties mean?
- Appearance: clear, opaque, pearlescent, gel or cream, compared with an approved standard sample.
- Colour: often described against a retained colour standard; ask how much variation is acceptable.
- Odour: "conforms to standard" means compared with an approved fragrance reference held by the supplier.
Descriptive properties depend on a physical standard. Ask that the standard be agreed and retained, and keep your own sealed reference sample so both sides compare against the same thing.
For fragrance in particular, descriptive language is not enough on its own. Two people can both describe a scent as “fresh citrus” and still mean quite different things. The physical standard settles the matter; the words only help you find it.
Which parts of a specification deserve questions?
- Missing limits: any property described but not limited.
- Vague storage conditions: "store in a cool place" without guidance may not suit a warm store room.
- Fill tolerance: ask how fill is controlled and checked, by volume or weight.
- Shelf life basis: ask whether shelf life is supported by stability testing and under what conditions.
- Version control: ask how you will be notified of changes and whether changes require your approval.
Questions at this stage cost little. The same questions after a disputed delivery cost much more.
Also check that the specification and the ingredient list agree with what is printed on the label. Mismatches between documents are common when a product has been revised, and they are easy to catch at approval if you look for them.

How do you use the specification after approval?
Sign or formally accept the specification version you approved and file it with the reference sample. Quote the specification number on purchase orders so every order refers to the same standard. At goods receipt, check the COA against your copy of the specification rather than the supplier's latest version, so that any unannounced change is caught.
Review specifications whenever the product, the packaging or your market requirements change. A specification that matches what is actually made, and what you actually need, is the cheapest quality control you have.
Terms used in specifications, such as viscosity, INCI and fill tolerance, are defined in the glossary, and STAY by Anadoris can share specification sheets for its ranges on the products pages or on request.
Questions on this topic
What is fill tolerance?
Fill tolerance is the permitted variation around the nominal fill of a container. It should be stated on the specification together with how fill is checked.
Why does viscosity matter for amenities?
Viscosity affects how a product pours, pumps and feels. A big change can make a dispenser drip or a miniature hard to squeeze.
Should a specification list every ingredient?
It should include or reference the full ingredient list in INCI naming, so you can check it against labels and your own requirements.
Keep reading
- Manufacturer, trader or distributor: who should supply your amenities?
- Sourcing hotel amenities from India for properties abroad
- RFI, RFQ or RFP: which request should an amenity buyer send?
- How to compare amenity samples from rival suppliers fairly
- How to stock an Airbnb bathroom
- Hospital and clinic bathroom amenities: what to consider
- Gym locker room amenities: a practical checklist
Looking for supply? See Hotels & resorts, browse the product range or request samples.

