Guide
Corrective action requests: getting a supplier to fix the root cause
A corrective action request asks a supplier to find the root cause of a problem, fix it and prevent it recurring, and to show evidence of each step. It moves the conversation from replacing faulty stock to changing whatever allowed the fault to happen.
By Hemang Jain, Founder, Anadoris
What is a corrective action request?
A corrective action request, sometimes called a supplier corrective action request or part of a CAPA process, is a formal written request from a buyer to a supplier. CAPA stands for corrective and preventive action. Corrective action removes the cause of a problem that has happened. Preventive action removes the cause of a problem that could happen, often in similar products or processes.
A replacement or a credit deals with the symptom: you get good stock instead of bad. A corrective action deals with the cause: the supplier changes a process, a check or a material so the same fault does not reach you again. Both are usually needed after a significant problem. Without the second, you are likely to see the first again.
When should you raise a corrective action request?
- A defect reaches your properties or customers, even if replaced quickly.
- The same minor problem occurs more than once, such as repeated short fills or label errors.
- An audit finds a gap in the supplier's controls.
- A delivery or documentation failure disrupts your operations.
- A change is made without the agreed notification.
Not every small issue needs a formal request. A single scuffed carton can be handled with a note. Reserve formal requests for problems that affect quality, safety, supply or trust, or that repeat. Too many requests for trivial issues dilute attention from the ones that matter, and suppliers start treating them as paperwork.

What should a good corrective action response contain?
This table sets out the stages of a good response and what to look for in each.
| Stage | What the supplier should provide | What to look for |
|---|---|---|
| Problem description | Clear statement of what went wrong, with batch and dates | Agrees with your evidence |
| Containment | Immediate steps to protect you, such as checking other batches and stock | Covers stock in transit and at the supplier |
| Root cause | Why it happened and why controls did not catch it | Goes beyond “operator error” |
| Corrective action | Changes to process, checks, training or materials | Addresses the root cause directly |
| Preventive action | Extension of the fix to similar products or lines | Looks beyond the one product |
| Verification | Evidence the change works, such as later batch results | Measured, not just stated |
Why is “operator error” rarely a root cause?
When a response blames an individual, ask why the error was possible and why it was not detected. People make mistakes in every factory. A robust system makes mistakes hard to make and easy to catch, through clear instructions, line clearance, second-person checks and inspection. If a wrong label reached a bottle, the real questions are how the wrong label got to the line and why the check before packing missed it.
Simple tools help suppliers dig deeper. The five whys method asks “why?” repeatedly until it reaches a cause that can be fixed in the system. A fishbone diagram groups possible causes under headings such as materials, methods, machines, people and environment. You do not need to run these yourself, but you can ask the supplier to show the reasoning behind its conclusion.
How do you set expectations for timing and follow-up?
- State in the request when you need acknowledgement, containment and a full response, scaled to severity.
- Name a contact on your side and ask the supplier to name an owner.
- Agree an interim update if the investigation takes longer.
- Track open requests in a simple log with status and dates.
- Review open requests at each performance review until closed.
Be realistic. A thorough root cause investigation takes time, especially if it involves the supplier's own suppliers. Containment, however, should be quick, because it protects your stock and guests while the investigation runs.

How do you close a corrective action properly?
Close a request only when the action has been taken and shown to work. Evidence might include updated procedures, training records, revised specifications, photographs of a new check on the line, and results from the next few batches. Then watch your own receiving checks and complaints for the same issue.
Record the closure in the supplier file and reflect it in the scorecard. A supplier that handles corrective actions openly and thoroughly is often more valuable than one that claims never to have problems.
For the immediate steps when a batch fails, see our guide on quality checks on incoming deliveries. STAY by Anadoris operates a documented complaint and corrective action process under its ISO 9001 and ISO 22716 systems, described on the manufacturing page.
Questions on this topic
What does CAPA stand for?
Corrective and preventive action. Corrective action removes the cause of a problem that happened; preventive action stops similar problems elsewhere.
Should every complaint lead to a corrective action request?
No. Use formal requests for problems that affect quality, safety, supply or trust, or that repeat.
What if a supplier refuses to investigate?
Record the refusal and raise it at senior level. A supplier unwilling to investigate problems is a significant risk to weigh in your sourcing decisions.
Keep reading
- Manufacturer, trader or distributor: who should supply your amenities?
- Sourcing hotel amenities from India for properties abroad
- RFI, RFQ or RFP: which request should an amenity buyer send?
- How to compare amenity samples from rival suppliers fairly
- How to stock an Airbnb bathroom
- Hospital and clinic bathroom amenities: what to consider
- Gym locker room amenities: a practical checklist
Looking for supply? See Hotels & resorts, browse the product range or request samples.

