Guide
How to check amenity quality is consistent between batches
Check batch consistency by comparing every delivery with a sealed reference sample, matching each certificate of analysis to an agreed specification, and tracking a few results over time. Consistency is mostly decided by the supplier's controls, so the buyer's job is to verify those controls are working.
By Hemang Jain, Founder, Anadoris
Why does batch-to-batch consistency matter?
Guests notice change more than they notice quality. A body wash that smells slightly different, a shampoo that suddenly feels thinner, or a lotion that is a shade darker can trigger comments and complaints even if each batch is perfectly acceptable on its own. For a branded range, inconsistency also weakens the identity you are paying to build.
Batch-to-batch consistency means each production run matches the approved product within agreed limits. It does not mean every batch is identical to the decimal point; it means variation stays inside a range guests will not notice.
Consistency matters operationally too. Housekeeping teams learn how much product a dispenser delivers and how a refill pack behaves. If a new batch is thinner or thicker, dispensers may drip or clog, and the effect shows up as service calls and wasted product rather than as a quality complaint.
What causes amenities to vary between batches?
- Raw materials: natural ingredients and fragrance materials vary with source and season.
- Process: mixing time, temperature and order of addition affect texture and appearance.
- Batch size: scaling a formula between vessel sizes can change results if not controlled.
- Packaging: a new bottle or closure supplier can change how a product dispenses.
- Storage and transport: heat and long storage can change colour, fragrance and viscosity.
Good suppliers control each of these with specifications, written procedures and testing. Ask how they handle the ones most relevant to your product.
Seasonal climate adds another variable. Products made or shipped in hot months can arrive looking slightly different from those made in cooler months, even when the formula is unchanged. Ask the supplier whether it adjusts anything seasonally and how it tests for heat stability.

Which checks can a buyer do at receipt?
You do not need a laboratory. This table lists simple checks most properties can do on each delivery.
| Check | How | Compare with |
|---|---|---|
| Batch code | Read code on cartons and units | Certificate of analysis |
| Appearance and colour | Pour a little onto a white surface in daylight | Reference sample, side by side |
| Fragrance | Smell from the container and on the skin | Reference sample, side by side |
| Texture and flow | Squeeze, pour or pump a fixed amount | Reference sample |
| Fill | Weigh a few units on a kitchen scale | Typical weight of approved units |
| Packaging | Check print, closures, leaks | Approved artwork and pack |
Record the result in a simple log: date, batch, checks done, pass or query, and who checked.
How do reference samples help?
A reference sample is a sealed unit of the approved product kept by the buyer. It gives you a fixed point to compare against, so you are not relying on memory of how the product used to smell. Keep it cool and away from light, label it with the approval date, and replace it with a newly approved sample if the product is formally changed.
Ask the supplier to keep its own retained samples from each batch for the product's shelf life. If a question arises, both sides can test the same material.
When you approve a new reference sample, record why. A note such as “new fragrance supplier approved after side-by-side test” saves confusion later when someone wonders why the reference differs from older stock in the store.
How can you spot slow drift over time?
Some changes happen gradually: a fragrance slowly getting lighter or a colour slowly deepening. Each batch passes, but the product a year later is noticeably different. To spot drift, keep a simple table of a few COA results, such as pH and viscosity, for each batch and look at the trend rather than each result in isolation.
If results creep steadily towards one limit, raise it with the supplier before they cross it. Also compare a current delivery with the original reference sample from time to time, not only with the previous batch.
A trend chart does not need special software. A spreadsheet with one row per batch and a simple line chart for each property is enough. Share it with the supplier at your regular review; it shows that you are paying attention and often prompts a useful conversation about process control.

What should you expect from the supplier?
- Written specifications for raw materials and the finished product.
- Standard batch instructions that are followed and recorded.
- Retained samples kept for each batch.
- Notification before any change to formula, fragrance, raw material source or packaging.
- A clear process for investigating and responding to consistency complaints.
Ask about these in your supplier review. A supplier that can describe its change control clearly is far less likely to surprise you.
STAY by Anadoris produces in vessels from 100 kg to 600 kg under ISO 22716 good manufacturing practice; see the manufacturing page for how batches are made and released.
Questions on this topic
Do natural ingredients make batches less consistent?
They can vary more by source and season. Good suppliers manage this with raw material specifications and testing.
How often should I replace my reference sample?
Replace it when a formal change is approved, and check it is still in good condition over the product's shelf life.
What if a batch passes the COA but guests still notice a difference?
Compare it with your reference sample and raise it with the supplier. The specification limits may need tightening for that property.
Keep reading
- Manufacturer, trader or distributor: who should supply your amenities?
- Sourcing hotel amenities from India for properties abroad
- RFI, RFQ or RFP: which request should an amenity buyer send?
- How to compare amenity samples from rival suppliers fairly
- How to stock an Airbnb bathroom
- Hospital and clinic bathroom amenities: what to consider
- Gym locker room amenities: a practical checklist
Looking for supply? See Hotels & resorts, browse the product range or request samples.

