Guide

What a certificate of analysis tells you, and what it doesn't

A certificate of analysis (COA) is a batch-specific document that reports the supplier's test results against the agreed specification. It tells you that a particular batch met defined limits when tested; it does not prove the product is safe in every use or that other batches will be the same.

By Hemang Jain, Founder, Anadoris

What is a certificate of analysis?

A certificate of analysis is a document issued by the manufacturer's quality function for one batch of product. It lists the tests carried out, the acceptable range for each test and the actual result, and it is signed or authorised by a person responsible for releasing the batch.

For amenities, a COA typically covers physical and chemical properties such as appearance, colour, odour, pH, viscosity and, for some products, microbiological results. It ties a batch code on your cartons to a record of how that batch performed in the supplier's laboratory.

Some buyers confuse a COA with a test report from an outside laboratory. A COA is normally issued by the manufacturer itself as part of releasing the batch. An independent laboratory report is a separate document, usually commissioned for a specific purpose such as a claim or a dispute. Both have their place; know which one you are looking at.

The value of a COA rests on the system behind it. A COA from a site with documented procedures, calibrated equipment and trained staff is more meaningful than a neat-looking form from a site you know nothing about.

What should a COA include?

  • Supplier name and address.
  • Product name and product code.
  • Batch or lot number, matching the code printed on the pack.
  • Date of manufacture and expiry or best-before date, if applicable.
  • Each test parameter, its specification limit and the actual result.
  • The test method or reference for each parameter.
  • A pass or fail conclusion.
  • Name and signature or authorisation of the person releasing the batch, and the date.

If the batch number on the COA does not match the code on the goods, the COA does not apply to those goods.

Look at the layout as well as the content. A COA that is clearly generated from a controlled system, with consistent formatting and traceable sign-off, inspires more confidence than one that looks edited by hand for each customer.

STAY by Anadoris concept: seafoam oval pump bottles in a granite outdoor vanity, ocean and palms
Seychelles granite island villa

How do you read a COA against the specification?

This table shows typical COA parameters for a liquid toiletry and what each result means in practice.

ParameterWhat it measuresWhy it matters
Appearance and colourVisual match to the approved standardGuests notice colour changes first
OdourMatch to the approved fragrance standardConfirms the right fragrance at the right strength
pHAcidity or alkalinityLinked to mildness and product stability
ViscosityThickness of the liquidAffects pouring, pumping and feel in use
Specific gravity or densityMass per volumeHelps check consistency and fill weight
Microbiological countPresence of micro-organisms against a limitIndicates hygienic production and preservation

Compare each result with the limit in your own copy of the specification, not only with the limit printed on the COA.

What can a COA not tell you?

A COA is useful but limited. It reports only the tests on it, on the samples tested, at the time of testing. It does not show:

  • How the product will behave after long storage in a hot store, unless stability data says so.
  • That every unit in the batch is identical; it reflects sampled units.
  • That the formula has not been changed, unless the specification and change control say so.
  • That the product meets the regulations of your market; that is a separate assessment.

A COA is evidence from the supplier about its own product. It is strongest when combined with a site you have audited, an agreed specification and your own incoming checks.

It also cannot tell you how the product will perform with your water or your dispensers. That is what your own trials and sample testing are for. Think of the COA as one layer in a set of overlapping checks, each catching what the others might miss.

What should you do if a COA looks wrong?

  1. Hold the goods. Do not issue them to rooms until the question is resolved.
  2. Check the basics: batch number, product code and specification version.
  3. Ask the supplier in writing to explain the result and, if needed, to retest its retained sample.
  4. Compare with your own check: appearance, odour and fill against your reference sample.
  5. Record the outcome in your supplier file, whether accepted, reworked or returned.

A result exactly at the limit on every batch, or results that never vary at all, are also worth a polite question. Real measurements usually move a little from batch to batch.

STAY by Anadoris concept: cobalt blue ribbed pump bottles in a white tile, lemons, dramatic distant sea
Amalfi cliffside suite

How should COAs fit into your receiving routine?

Ask for the COA to arrive before or with each delivery, ideally by email so it can be filed without paper chasing. At goods receipt, match the batch code on the cartons to the COA, check that all results passed and file it against the delivery.

Over time, a folder of COAs becomes a quality history. Plotting a few results, such as viscosity or pH, across deliveries is a simple way to spot drift before guests do.

For broader receiving checks, see our guide to quality checks on incoming deliveries. STAY by Anadoris issues batch documentation with its products, and terms such as viscosity and pH are explained in the glossary.

Questions on this topic

Is a COA the same as a specification?

No. The specification sets the agreed limits for a product; the COA reports how one batch measured against those limits.

Can I ask for a COA for samples?

Yes, if the sample comes from a production batch. Laboratory samples may not have a full COA, so ask what testing was done.

Who issues the COA?

The manufacturer's quality function issues it. A trader may pass on the maker's COA, which should still show the maker's batch details.

Keep reading

Ready when you are

Tell us about your space. We will send samples.

CallRequest samples