Guide
What does a certificate of analysis show for an amenity batch?
A certificate of analysis (COA) is a signed record of the tests carried out on one production batch and whether each result met the agreed specification. For a hotel amenity it usually covers appearance, colour, odour, pH, viscosity or density, and often microbiological results.
By Hemang Jain, Founder, Anadoris
What is a COA for?
The COA links a specific batch to the specification you approved. It lets a buyer confirm that what arrived was tested and released, and it gives a reference point if a later complaint arises. A COA is batch-specific: one certificate cannot cover several batches unless each batch number and its results are shown.
For hotels, the COA is also the simplest way to show a brand-standards auditor that incoming stock is controlled. A folder of certificates matched to delivery notes demonstrates a routine, not just a promise.
What should a COA contain?
- Product name and product code.
- Batch or lot number, matching the code printed on the pack.
- Manufacturing date, and expiry or durability information where used.
- Each test parameter, the method or reference, the specification limit and the actual result.
- A pass or fail outcome for each test and for the batch.
- Name, role and signature or approval of the person who released the batch.

What do the usual tests mean?
This table explains the parameters most often seen on an amenity COA and why each matters.
| Test | What it checks | Why it matters |
|---|---|---|
| Appearance and colour | Look of the product against the reference sample | Consistency guests notice |
| Odour | Fragrance against the reference | Detects missing or wrong fragrance |
| pH | Acidity or alkalinity within a range | Skin comfort and preservative performance |
| Viscosity | Thickness within a range | How it pours, pumps and feels |
| Specific gravity or density | Mass per volume | Fill accuracy and consistency |
| Microbiological count | Level of bacteria, yeast and mould | Hygiene and product safety |
| Absence of specified microorganisms | Named organisms not detected | Safety, particularly for leave-on products |
How should you read the results?
Read each result against its limit, not just the pass column. A result that sits at the edge of its range on several batches in a row may be an early sign of drift, even though each batch passed. Compare COAs across deliveries and ask about any trend.
Microbiological limits are often set with reference to ISO 17516, which gives limits for cosmetics. The method, not just the number, should be stated.
Be cautious with results reported only as a word such as complies or conforms. That may be acceptable for appearance, but measurable properties such as pH and viscosity should show the actual figure, so that you can see where in the range each batch sits.
What if a COA does not match the delivery?
- Hold the stock in quarantine rather than issuing it to rooms.
- Check that the batch number on the COA matches the pack.
- Ask the supplier for an explanation and, if needed, a corrected certificate.
- Compare a unit with your approved reference sample.
- Record the outcome in the product file.
Most mismatches turn out to be paperwork errors, such as a certificate sent for the wrong batch, but treat each one seriously until it is resolved.
See quality checks on incoming deliveries for a simple receiving routine.

What a COA does not prove
A COA shows that a batch met its release tests. It does not replace the safety assessment, stability data or a preservative efficacy test, which are carried out on the formula rather than on each batch. Ask for those separately where your market or brand standard requires them, as covered in microbiological and preservative testing. STAY issues a certificate of analysis for each batch on request.
Questions on this topic
Should every delivery come with a COA?
It is good practice to ask for one per batch. A delivery containing several batches should have a certificate for each.
Can a supplier test only some batches?
Release testing should cover every batch. Ask how the supplier samples and tests if a COA seems generic.
Who should sign the COA?
A person with authority to release batches, usually in quality control or quality assurance, named on the certificate.
Is an external laboratory needed?
Not always. Many tests are run in-house. Some buyers ask for occasional third-party verification for added assurance.
Keep reading
- What documents should you ask an amenity supplier for?
- What is an INCI list and how do you read one?
- Fragrance allergens: what must appear on an amenity label?
- Do hotel amenity liquids need a safety data sheet?
- How to stock an Airbnb bathroom
- Hospital and clinic bathroom amenities: what to consider
- Gym locker room amenities: a practical checklist
Looking for supply? See Hotels & resorts, browse the product range or request samples.

