Guide
Tamper evidence for amenity bottles and dispensers: what to specify
Tamper evidence is a packaging feature that shows clearly whether a pack has been opened, such as a seal, a breakable cap ring or a shrink band. For dispensers, it comes from sealed refill cartridges, lockable units and refill records, so a hotel can show that guests received product in the state it was made.
By Hemang Jain, Founder, Anadoris
Why does tamper evidence matter for hotels?
Guests increasingly ask whether a product has been used before them, especially with wall dispensers. Tamper evidence answers the question visibly. It also protects the hotel: if a guest reports a problem, a sealed pack or a documented refill makes it far easier to show the product had not been diluted, topped up or contaminated after it left the factory.
Tamper evidence is not the same as child resistance or theft prevention. A seal shows that a pack has been opened; it does not stop anyone opening it. Be clear which problem you are solving before choosing a feature, because the answers differ.
Which tamper-evident features are available?
This table lists common tamper-evident features and where each fits.
| Feature | How it shows tampering | Typical use |
|---|---|---|
| Induction or foil seal under the cap | Seal broken or removed | Bottles and jars |
| Breakable cap ring | Ring separates on first opening | Screw-cap bottles |
| Shrink band or sleeve | Band torn or missing | Caps and pumps |
| Heat-sealed sachet | Seal opened or damaged | Single-use sachets |
| Sealed refill cartridge | Cartridge seal pierced only when fitted | Closed dispenser systems |
| Lockable dispenser | Unit opened only with a key or tool | Wall dispensers |
| Tamper-evident label on carton | Label torn on opening | Gift sets and kits |

What about wall dispensers?
Dispensers fall into two broad types. In closed systems, a sealed cartridge or pouch is fitted whole and replaced when empty, so product does not contact the air until it is dispensed. In open refillable systems, staff pour product from a bulk pack into a reservoir. Open systems can work well, but they rely on discipline: no topping up a partly used reservoir with a different batch, regular cleaning, and refill records.
If guests or brand standards require proof that product is untouched, a closed sealed-cartridge system with a lockable housing gives the clearest evidence.
What records support tamper evidence?
- Refill log for each dispenser: date, staff member, product and batch number.
- Cleaning log for open reservoirs.
- Receiving record showing batch numbers of refill packs.
- A rule that partly used reservoirs are emptied and cleaned rather than topped up, if your procedure requires it.
See refill pack handling and dispenser maintenance for the practical routines.
How do you write tamper evidence into a specification?
- Name the feature for each pack, for example 'screw cap with breakable ring'.
- State what counts as a reject at receiving, such as a broken seal.
- For dispensers, state the system type and whether units must lock.
- Require refill packs to be sealed and batch-coded.
- Approve the feature on the reference sample.
Tamper evidence that is not in the specification is easily dropped when a component changes.
Check the feature at receiving as well. A carton of bottles with lifted seals, or refill pouches with damaged welds, should be quarantined and reported rather than issued to rooms, and the supplier should explain the cause.

Balancing tamper evidence with waste
Every seal, band and sleeve adds material. Choose the lightest feature that does the job, and avoid layering several on the same pack. A sealed sachet needs no extra band; a lockable dispenser with sealed cartridges may need nothing more. STAY supplies miniatures, sachets and refill packs from 3 ml to 25 litres; request samples to compare closure and seal options.
Questions on this topic
Are wall dispensers less hygienic than miniatures?
Not necessarily. Closed sealed systems and well-run refill routines both work; the evidence comes from design and records.
Is a shrink band needed on every bottle?
No. A breakable cap ring or foil seal may be enough. Avoid layering several features.
Should refill packs carry batch codes?
Yes. Batch codes on refills let you trace product back to its certificate of analysis.
Can guests see that a dispenser is sealed?
Lockable housings and visible cartridge designs help, and a small card explaining the system can reassure guests.
Keep reading
- What documents should you ask an amenity supplier for?
- What is an INCI list and how do you read one?
- Fragrance allergens: what must appear on an amenity label?
- What does a certificate of analysis show for an amenity batch?
- How to stock an Airbnb bathroom
- Hospital and clinic bathroom amenities: what to consider
- Gym locker room amenities: a practical checklist
Looking for supply? See Hotels & resorts, browse the product range or request samples.

