Guide
Cost per millilitre: comparing amenity sizes and formats
Cost per millilitre is the landed price of a product divided by its fill, and it is the fairest starting point for comparing sizes and formats. Adjust it for the product actually used, after waste, and you have a figure that compares miniatures, larger bottles and refills on equal terms.
By Hemang Jain, Founder, Anadoris
Why unit price misleads
Unit prices compare poorly across sizes. A small bottle has a low unit price but carries the whole cost of a bottle, closure and label for a little product. A large refill has a high unit price but spreads its packaging over much more product. Comparing unit prices directly makes small sizes look cheap and large ones look expensive, when the opposite is usually true per millilitre.
The same problem appears when comparing suppliers who offer different standard sizes. One may quote a slightly smaller miniature at a lower price; per millilitre, it may be no cheaper at all. Converting everything to one measure removes that confusion before any negotiation starts.
How to calculate cost per millilitre
Cost per millilitre = landed unit cost ÷ fill in millilitres
Use landed cost, including freight and handling, not the ex-works price. For products sold by weight, such as soap or creams, use cost per gram. Make sure you use the declared fill, and spot-check it by weighing a few units against the declared quantity.

Adjusting for what is actually used
The product left in a discarded bottle is paid for but not used. Adjust cost per millilitre for this:
Effective cost per millilitre used = cost per millilitre ÷ share of fill actually used
If guests typically use only part of a miniature before it is replaced, the effective cost rises sharply. If a refill pack is used almost to the end, the effective cost stays close to the nominal figure. Measure the share used with a simple count of returned items, as described in what to do with partly used amenities.
A comparison layout
Fill in your own figures to compare formats side by side.
| Format | Landed unit cost | Fill (ml) | Cost per ml | Share used | Effective cost per ml used |
|---|---|---|---|---|---|
| Miniature | C(m) | F(m) | C(m) ÷ F(m) | S(m) | Cost per ml ÷ S(m) |
| Larger bottle | C(b) | F(b) | C(b) ÷ F(b) | S(b) | Cost per ml ÷ S(b) |
| Dispenser refill | C(r) | F(r) | C(r) ÷ F(r) | S(r) | Cost per ml ÷ S(r) |
Then multiply effective cost per millilitre by millilitres used per room night to get product cost per room night for each format.
From cost per millilitre to cost per use
Guests do not use the same amount of every product. A thicker or more concentrated product may need less per use. To compare products of different strength, estimate millilitres per use and multiply by effective cost per millilitre used. That gives cost per use, which is closer to what you are really buying. A product that costs more per millilitre but needs less per use can be the cheaper choice, and the reverse is equally possible. See our guide on comparing samples on price and value for how to measure uses per bottle.

What cost per millilitre leaves out
- Equipment for dispensers, spread over its useful life.
- Labour to place, refill or swap units.
- Storage space for different pack sizes.
- Guest perception of each format.
Cost per millilitre is a product comparison, not a full decision. Combine it with total cost of ownership for the format choice; see miniatures or dispensers. STAY can quote the same formula across sizes so the comparison is like for like; ask through the quote page.
Questions on this topic
Is a larger size always cheaper per millilitre?
Usually, because packaging is spread over more product, but check each quotation, especially with premium packs.
Does cost per millilitre include freight?
It should. Use landed cost so that suppliers with different trade terms are compared fairly.
Should I use cost per gram for soap?
Yes. Use the declared weight and the same method as for liquids.
How do I find the share used?
Collect items removed from a sample of rooms, estimate fill levels and convert to the share of each fill that was used.
Keep reading
- How to build an annual hotel amenity budget
- Setting an amenity cost target and tracking variance
- What drives the unit cost of an amenity bottle?
- Total cost of ownership for amenities: a working method
- How to stock an Airbnb bathroom
- Hospital and clinic bathroom amenities: what to consider
- Gym locker room amenities: a practical checklist
Looking for supply? See Hotels & resorts, browse the product range or request samples.

