Guide
What do part-used amenity bottles really cost a hotel?
Part-used bottles cost a hotel the product left inside them, plus the labour and disposal of handling them, and that cost repeats with every room night. Measuring it with a simple count turns a vague worry into a wastage factor you can budget for and reduce.
By Hemang Jain, Founder, Anadoris
What counts as amenity wastage?
Wastage is any amenity bought but not used for its purpose. It includes part-used bottles removed from rooms and thrown away, full units damaged in storage or delivery, units taken by guests beyond what was intended, and stock that ages past its usable life. Each has a different cause and a different fix, so record them separately.
A useful definition for budgeting is this: wastage is the gap between the units you issue from stores and the units guests actually consume. Everything in that gap is paid for and gives no value to anyone.
For what to do with items once removed, see what to do with partly used amenities. This guide focuses on measuring the cost.
How to measure part-used waste
- Choose a sample of rooms that represents your room types and guest mix.
- For a set period, collect every amenity removed from those rooms instead of discarding it.
- Estimate the fill level of each item, such as full, mostly full, half or nearly empty.
- Convert to equivalent full units: for example, two half-full bottles equal one full unit.
- Divide equivalent full units discarded by room nights in the sample.
The result is waste per room night (w). Multiply by the landed unit cost to get the cost of waste per room night, and by annual room nights for the annual figure.

Turning the count into a budget factor
Your wastage factor compares what you buy with what guests actually use:
Wastage factor W = units issued ÷ units consumed
If every unit issued were used to the end, W would equal one. The higher W rises above one, the more you pay for product that is thrown away. Use W in the budget formula: annual cost equals room nights × usage × landed cost × W. Recalculate it whenever you change the replacement rule or the fill size.
Keep the counting simple enough that housekeeping can repeat it. A fill-level scale with four or five steps is accurate enough for budgeting, and a short tally sheet per floor is easier to keep than a detailed log. Precision matters less than doing the count the same way each time.
Where waste usually comes from
| Source | Why it happens | Possible fix |
|---|---|---|
| Replacement at every service | Bottles removed while still usable | Replace on a marked level or on checkout |
| Fill size too large for stay length | Short-stay guests use little of a large bottle | Match size to typical stay |
| Damage in storage | Heat, humidity, crushed cartons | Improve storage and stacking |
| Damage in transit | Weak packing or rough handling | Check packing and inspect on arrival |
| Expired stock | Overbuying slow lines | Fewer variants, order to forecast |
| Guests taking extras | Items left loose on trolleys | Secure trolleys, control issue |
How fill size and stay length interact
A bottle that suits a three-night stay may be mostly wasted on a one-night stay, and too small for a long stay. Look at your average length of stay by segment. Where stays are short, a smaller size or a dispenser reduces leftover product. Where stays are long, a larger size used to the end may lower both cost and waste. Fill sizes can be made from 3 ml to 25 litres, so there is usually a size that fits the pattern.

Reporting waste to owners and auditors
Owners and sustainability auditors increasingly ask for waste data. A simple record of equivalent full units discarded per room night, by item, gives both a cost figure and a quantity figure. Keep the counting method the same each time so the trend is meaningful. For reporting formats, see reporting amenity waste reduction.
If your count suggests a different size or a refill format, STAY can quote the alternatives; see refill systems.
Questions on this topic
How long should the waste count run?
Long enough to cover a representative mix of stays and occupancy. Repeat it after any change to the replacement rule.
Should waste be in the budget?
Yes. Budgeting as if nothing is wasted guarantees a variance. Use your measured wastage factor.
Do dispensers eliminate waste?
They reduce part-used bottle waste, though some residue remains in refill packs and equipment has its own costs.
Keep reading
- How to build an annual hotel amenity budget
- Setting an amenity cost target and tracking variance
- What drives the unit cost of an amenity bottle?
- Total cost of ownership for amenities: a working method
- How to stock an Airbnb bathroom
- Hospital and clinic bathroom amenities: what to consider
- Gym locker room amenities: a practical checklist
Looking for supply? See Hotels & resorts, browse the product range or request samples.

